Sterile Tank Vent Filters

Sterile Tank Vent Filters Brochure
Sterile Tank Vent Filters Technical Data
Sterile Tank Vent Filters Presentation

Why Choose Micropure Filters

Features and Benefits

Technical Data

Sterile Tank Filter
The Micropure Segmented design (shown above) offers significant advantages over conventional filter cartridges. Air or gas flows through the filter media into an adjacent segment. Filtered air or gas exits through openings at the center of the cartridge and out the sterile side of the housing.

How MicroPure Tank Vent Filters do it better

System Security

  • Self-sealing PTFE membranes with a 0.2 micron retention efficiency for air and gas.
  • Each Filter Membrane works independently allowing for maximum filtering capability.
  • A stainless steel tension rod and parts that provides continued support upstream and downstream of the filter membrane.
  • The design of Micropure Segmented Filters has been subjected to extensive testing in
  • Europe and the United States.

Application Versatility

  • The required segmented element length and diameter are determined by your application giving each application an individualized fit.
  • Unlike conventional cartridge filters, Micropure's Segmented filters can handle bi-directional flow.
  • Filters allow higher flow rates than conventional filters while maintaining submicron bacterial efficiency.**
  • High Temperature Tolerance

Unlimited Reusability

  • Stainless Steel segmented discs, which will out last the conventional cartridge style filters.
  • Since each membrane acts independently, Increasing flow rate or pressure can be achieved by simply adding more membranes/segmented element discs.


  • You only Replace the media discs. The element stays in the filter for its entire life.
  • Cost of Ownership is significantly less than competitors.


  • MicroPure filters can be steam sterilized "in-situ" or in place up to 150 times with no loss of filtering effectiveness as validated by an internationally recognized food laboratory.
  • Micropure filters can Also be sterilized using autoclave, hydrogen peroxide, steam or a variety of sanitizing agents.*
  • Membrane Replacement is Simple and Easy.
  • Simple, on-site visual inspection of individual filter membrane
  • Membranes are easily removable for laboratory analysis or culture.
  • easily mounts to tanks and containers
  • excellent breathing properties with weatherproof cover

No other filter offers this combination of features:

Perforated Stainless Steel Modular Segments

  • Allows for bi-directional flow during sterile breathing on tanks and containers
  • Clean-in-place with steam (150 times) or common sanitizing agent*

Durable Materials of Construction—Stainless Steel and PTFE

  • Broad range of chemical compatibility
  • Autoclavable, high temperature tolerance
  • Low extractable levels

Unique Flat, Double Layer Membrane Design

  • Low replacement cost compared to conventional cartridge
  • Long operational periods due to high throughput,initial     pressure drop and high capcacity.
  • Simple, on-site visual inspection or “plating” or individual filter   membrane; easily removable for laboratory analysis or culture. 

Simplicity of Design

  • Easily mounted on tanks or containers
  • Excellent breathing properties with weatherproof cover
  • Capacity increased by adding segmented discs.