Sterile submicron filtration is a necessary part of your process in order to reduce batch contamination, spoilage, and product loss. Especially important in the food, beverage, and pharmaceutical industries, sterile filtration protects your product from harmful submicron particle contamination and bacterial transfer or growth.
To maintain safe, balanced pressure during the filling or emptying of a storage vessel, tank vent or breather filters are essential to reduce the possibility of contaminating your product.
MicroPure Segmented Tank Vent Filters feature a patented design that offers significant advantages over conventional filter cartridges.
Self-sealing PTFE membranes with a 0.2 micron retention efficiency for air and gas are sandwiched between perforated stainless steel segments within an stainless steel housing. The independently functioning modular segments are clamped together by a stainless steel tension rod that provides continued support upstream and downstream of the filter membrane. The required cartridge length and diameter are determined by your application.
Unlike conventional pleated cartridges that degrade with each sterilization, Micropure filters can be steam sterilized in place up to 150 times with no loss of filtering effectiveness, as validated by an internationally recognized food laboratory. Other sterilization or cleaning methods commonly used are autoclave, hydrogen peroxide, steam, or a variety of sanitizing agents.*
When membrane replacement becomes necessary, the operational-and disposal-cost is considerably lower than for other filters. With Micropure filters, only the small membrane media are replaced-not the entire cartridge.
Due to the porosity of our double-layer PTFE membrane, Micropure filters permit higher flow rates than conventional filters, while maintaining submicron, bacterial retention efficiency.**
The rugged, reliable design of Micropure Segmented Filters has been subjected to extensive testing in Europe and the United States, with more than 5,000 systems installed in food-and beverage-processing applications.
The results are unquestionable: MicroPure Segmented Filters, designed for two-way flow, ensureconsistent, uncompromised security for any application.
To maintain safe, balanced pressure during the filling or emptying of a storage vessel, tank vent or breather filters are essential to reduce the possibility of contaminating your product.
| Maximum Operating Pressure | 232 psig | 16 bar |
| Maximum Differential Pressure | 75 psid | 5.2 bar |
| Maximum Reverse Pressure | 75 psid | 5.2 bar |
| Maximun operating temp | 250°F/121°C | |
| Maximun Intermittent temp | 400°F/204°C | |
| Pore Sizes | .2 micron absolute. (Other sizes available upon request) | |
| Material of Construction: | ||
| Housing | 304 SS | |
| Segmented Filter Discs | 304 SS | |
| Filter Media | 304 SS | |
| Rainproof Cover | 304 SS | |
| Saturated Steam | 20 mins @ 250°F |
| Hot Air | 12 hrs @ 250°F |
|
|
GPM: Gallons per minute
SCFM: Standard cubic feet per minute
M3/hr: Cubic meters per hour
PSID: pounds per square inch (pressure) drop
NOTE: please check the pressure capacity of your tank to ensure the proper tank vent selection.
Micropure Filtration, Inc. provides a five year limited warranty on all parts except O-rings and media. A one year warranty on filter media is based a maximum loading of 140 million particles per cubic meter (normal conditions). These warranties extend only to media purchased from Micropure or a certified Micropure Filtration Vendor.
Visit Us at
Booth 6002
