Go Green - Filter discs mean less waste
Segmented Filtration
About Us
Contact Us

 

Micro-Series

Finite’s Air and Gas Microfiltration Products

Membrane Selection

Parker Finite Micro Series

Features and Benefits - PTFE Membrane

  • PTFE membrane media is non-fiber releasing and provides for broad chemical compatibility
  • The high flow rates and optimized surface area help reduce filter consumption
  • Integrity tested - 100%
  • Pleated construction provides broad high purity filtration area for maximum yields
  • PTFE Memrane is biosafe in accordance with USP Class V1-121°C Plastics Tests
  • Polypropylene support hardware, with fluorocarbon o-ring seals are able to withstands demanding operating conditions
  • Narrow pore size distribution ensures the ultimate in retention and flow rates
  • All materials of this construction are listed with the FDA as acceptable for food contact according to CFR Title 21
  • Parts are manufactured and packaged in Class 10 clean rooms
  • 99.999999% (8 log) efficiency at specified removal ratings (0.01 μm, 0.02 μm)

Parker Finite Micro SeriesMembrane Element Specifications

  • Sealing Technology: Thermal Bonding
  • O-Rings/Gaskets: Fluorocarbon
  • Maximum Differential Pressure (FWD): 60 PSID
  • Maximum Differential Pressure (REV): 50 PSID
  • Packaging: Double bagged in Class 10 clean room

PTFE Membrane Elements

(PTFE Membrane Elements have polypropylene membrane support and polypropylene end caps)

 

Finite P/N

Micron Rating

Bubble Point
(PSIG /bar)

Surface Area
(SQ. FT. /SQ. Meters)

Max. Temp.
Double Open
Ended 		1BAP20-100V 0.01um >24 /1.7 7.5 /0.8 175o F /79°C
1BAP20-200V 0.01um
>24 /1.7 15.0 /1.6 175o F /79°C
2BAP20-100V 0.02um >16 /1.1 7.5 /0.8 175o F /79°C
2BAP20-200V 0.02um >16 /1.1 15.0 /1.6 175o F /79°C
222/Flat 1BDP20-100V 0.01um >24 /1.7 7.5 /0.8 175o F /79°C
1BDP20-200V 0.01um >24 /1.7 15.0 /1.6 175o F /79°C
1BDP20-300V 0.01um >24 /1.7 22.5 /2.4 175o F /79°C
2BDP20-100V 0.02um >16 /1.1 7.5 /0.8 175o F /79°C
2BDP20-200V 0.02um >16 /1.1 15.0 /1.6 175o F /79°C
2BDP20-300V 0.02um >16 /1.1 22.5 /2.4 175o F /79°C

How To Order Membrane Elements

(Housings must be ordered separately- see Housing Selection Chart below.)

1

B

D

P

20
-

200

V
Nominal Pore Size
Materials of Construction
End Cap Configuration
Pleated Media
Nominal Element Diameter
Nominal Length
O-Ring/Gasket Material
1 - 0.01 um
2 - 0.02 um 		B - PTFE A - Double Open*
D - 222/Flat 		P 20 - 2.7” Outside Dia.
100 - 10 in.
200 - 20 in.
300 - 30 in.		 V - Fluorocarbon
*A only available on Nominal Length 10 in.